Wednesday, February 26, 2014

ge-potscrubber-650-goes-to-work-with-no-water

GE Potscrubber 650 goes to work with no water...


Hello, I did a search and couldn't find anything with my problem and hopefully someone here has seen it before. The unit was in the house when we bought it 3 years ago. GE Potscrubber 650. Load it with dishes, put in the detergent and close and lock the door. When you click the timer over to start the wash, it DOES NOT fill with water, just starts making the cyling noise like it is full of water and is trying to wash. No manual so I'll start searching online but if anyone here has a good idea, I'll start there. Cheers! WR Take the bottom plate off dishwasher locate the water inlet valve on left side. Check the solenoid for voltage while in the fill cycle. If you get 120 volts no water, the valve needs replaced. You might want to slightly loosen the water line first to be sure you have water going to valve. Another thing to check is the float inside the dishwasher on the front left floor. Make sure it moves freely up down isn't stuck in the up position. Thanks so much! I'm checking those things tonite! I'm good with tools and can build engines and transmissions, but have NO IDEA how these things operate. Appreciate your time! WR








Related Posts:




  • Installing indirect water heater

    Installing Indirect water heaterI have a SuperStor 40 Gal Indirect water heater it's 7 years old and may be starting to leak (it's up on blocks and I see a water stain every 3 or 4 days, in one co...


  • Frigidaire ultraquiet iii not emptying all the water

    Frigidaire Ultraquiet III not emptying all the waterI have a Frigidaire Ultraquiet III dishwasher, Model no. FDB8TS0RCB0 (BTW, 0 = zero) and Serial no. TH40251999 (zero again). When it runs, the w...


  • Is it safe to bypass thermal switch on gas water heater

    Is it safe to bypass thermal switch on gas water heater?It looks like my 10+ year old hot water heater had a faulty control unit and/or thermal switch. I couldn't get the pilot light to stay lit a...


  • Ge smartwater no soft water

    GE Smartwater No Soft WaterI have a GE GXSF27e01 Smartwater Water softener. No soft water. I have run the diagnostics and everything seems fine. I cleaned the Venturi and replaced the Seals in it....


  • Ge nautilus dishwasher will not fill with water

    GE Nautilus Dishwasher will not fill with waterI have a GE Nautilus dishwasher which will not fill with water. we've read some info and have seen some possible causes. Checked the float (not the s...